Set Up WiFi on Any BLE Device — No Cables. No Code.
A purpose-built iOS app that lets you configure WiFi on BLE-enabled IoT devices in under 60 seconds — straight from your phone. No serial monitor, no hardcoded credentials, no laptop on-site.
The Problem with Traditional WiFi Setup
Every IoT team hits the same wall. Getting devices connected to WiFi shouldn't be this hard — but the current options are slow, manual, and developer-dependent.
Serial Monitor Setup
Hardcoding WiFi credentials means reflashing firmware every time the network changes — slow, error-prone, and unscalable.
Hotspot Workarounds
Using a phone hotspot to match SSID gets devices online temporarily but breaks the moment someone changes their phone settings.
Laptop & Cable Dependency
Needing a laptop on-site to configure devices is impractical for field deployments, testing environments, and non-technical teams.
Setup Time Adds Up Fast
Every manual configuration step multiplies across every device in your fleet — costing hours in testing, QA, and field deployment.
Every delay in setup slows down your entire dev and deployment cycle
How It Works
Four steps. Under sixty seconds. No technical expertise required on-site.
Supported Platforms
The app is designed to work across the most widely used BLE-capable microcontrollers in IoT development — from rapid prototyping boards to production-grade Nordic chipsets.
ESP32
Dual-core powerhouse with built-in BLE & WiFi. The go-to chip for most IoT products and smart device development.
ESP8266
Cost-effective WiFi module with BLE support. A favourite for lightweight connected devices and legacy projects.
Pro Grade — nRF (Nordic)
Industry-standard Nordic chipsets known for ultra-low-power BLE. Ideal for wearables, medical, and battery-critical devices. Our nRF development team
Custom Hardware
Any BLE-enabled board that follows standard GATT profiles can integrate with the app — no proprietary lock-in.
Using a different chipset?
If your hardware supports standard BLE GATT characteristics, there's a good chance it'll work. Reach out to our IoT team and we'll confirm compatibility or help you integrate.
Key Features
Every feature in the app was built around one goal — making WiFi provisioning the least of your worries when shipping IoT products.
Built for Real IoT Teams
Whether you're a solo embedded engineer or a team shipping connected products at scale, this app was designed around your workflow — not a textbook setup flow.
Hardware Startups
Move fast without getting bogged down in provisioning plumbing. Ship prototypes and MVPs quicker with a ready-to-use setup flow.
Embedded Engineers
Stop wasting bench time on serial monitors and reflashing. Focus on firmware logic while the app handles WiFi config cleanly.
IoT Product Teams
Give your QA and operations teams a tool they can actually use — no developer needed on every device setup or field test.
Connected Device Companies
Deploy fleets of devices faster and with fewer errors. Standardise your provisioning flow across every site and every team.
If your team ships hardware, this app saves you time — every single deployment.
From first prototype to field installation, BLE WiFi Setup removes the friction that slows IoT teams down at every stage.
Not Just an App
Most BLE tools are built for debugging — packed with logs, raw GATT explorers, and features that engineers rarely need in the field. This is different. It's a purpose-built provisioning tool, stripped down to exactly what gets the job done.
Built for Debugging
Built for Deployment
Just what you need to get devices connected and working — nothing more, nothing less.
App Download
The app is live on the App Store. Download it, connect to your BLE device, and have WiFi configured in under a minute.
Need a White-Label Version?
We offer customisation and white-label solutions for teams building IoT products at scale. Take everything we've built and ship it as your own — with your branding, your firmware, your flow.
Brand It as Your Own App
Your logo, your colours, your name on the App Store. Full visual customisation so the app feels native to your product — not a third-party tool.
Integrate with Your Firmware
We work directly with your embedded team to map BLE GATT profiles and ensure seamless communication between app and device.
Customise Flows for Your Product
Add steps, change screens, modify logic. Whether it's onboarding, provisioning, or cloud sync — we tailor the flow to match exactly how your product works.
Let's build the right version
for your product.
Talk to our IoT team about your hardware, your use case, and what a custom version would look like for your business.
Turn Your Prototype into a Product
If you're building an IoT device, setup is just the beginning. At DigitalMonk, we work with hardware teams end-to-end — from early prototypes to production-ready systems that scale.
Production-Ready Hardware
We take rough prototypes and engineer them for reliability — proper PCB design, component selection, and manufacturing-readiness built in from the start.
Scalable Firmware
Clean, maintainable embedded code that grows with your product. OTA updates, power management, BLE/WiFi stacks — done right the first time.
Reliable IoT Systems
End-to-end architecture covering device-to-cloud communication, backend analytics, remote diagnostics, and robust field deployment pipelines.
